SERVICE FOR STERNDRIVE AND INBOARD ENGINE
Change of oils and gear oil
The main priority in engine maintenance is the oil change. It must be done every year or every 100 hours of operation of the engine. However, with the gear oil change, we achieve the transmission system to work without problems.
The engine maintenance is an issue where every boat-yacht owner should be concerned. In this way, we improve any problems in the engine or in any kind of component. Therefore, during a trip we are sure that we will be safe and there will be no problem. Lubricants or other additives also play a special role in the longevity of the engine as well as its proper operation.
Maintenance and repair of Drive, IPS, propulsion systems (jet)
The Marine Service Team provides many services for the repair of your boat. One of them is the maintenance and repair of the Drive, IPS as well as the propulsion systems (jet).
If you have a marine engine with drive you need to know that it receives enormous stresses and forces from use. The long hours of operation and stress of these engines create overheating, resulting in several times developing drive damages. Marine engines with drives require frequent maintenance so that both the engines and the drives run smoothly and properly.
Engine maintenance, repair, winterizing
Basic procedures for marine engines maintenance inspection are: engine washing, engine painting, anode inspection, lubrication, rinsing, anti-corrosion spraying, anodes inspection, fuel supply line inspection, water pump and propeller inspection, electrical inspection, battery charging. In general inspecting the vital components of the engine.
Transom maintenance and repair
The repair as well as the maintenance of the transom is also very important. This component is the connection of the stern drive to an inboard engine. Any problem you encounter, you can contact us for assistance.
Ultrasonic cleaning and repair of fuel injectors
Injector removal, injection control and volumetric testing. When the test results exceed the limits, we place the injectors connected to the specialized injector machine with the appropriate chemicals and then they cleaned with ultrasound.
The injectors spray fuel directly into the engine. During long hours of engine’s operation and kilometers, the injectors’ nozzles wear out. Apart from the fact that may be arisen operational issue on the engine, the boat starts to burn more fuel. By cleaning the injectors with ultrasound, we manage to distribute the fuel correctly quantitatively as well as the correct way of spraying in the combustion chamber, having as a direct result the lower consumption.
Turbo maintenance and repair
Its operation as well as a poor maintenance of your marine engine can easily cause damage and malfunctions to the turbo. Thus, checking for clogged intake and exhaust systems is essential to deal with this problem. The whole system is checked and the exhaust is cleaned. In addition, during the maintenance and repair of the turbo, the bearings are checked for any damage.
The turbo is widely known as a mechanical system, which increases the initial power of the engine, with great fuel economy. It is worth emphasizing that the maintenance of the turbo can be done only by specialized personnel.
Ultrasonic cooling system cleaning
Have you noticed that the heat exchanger does not work as it should and raises the temperature or is clogged and has collected salts from the sea? Then the correct cleaning with ultrasonic is required. The Marine Center with its well-trained staff provides you with immediate solutions to technical issues.
Fuel pump maintenance and repair
By maintaining or repairing the fuel pump, we achieve the best performance through the continuous supply of fuel to each cylinder, better engine’s start, improved fuel economy as well as this way you will save money by buying a new spare part.
Propeller repair and polishing
The propeller is probably the most "weird" part of a boat and it is which determines its speed. It is crucial as well as very important to be able to calculate its parameters in order to make the most of the engine’s capabilities. The most important construction features are equal wingspan, balance, material and pitch.
Diagnostic test and technical report
Whether you have noticed a problem on your boat and engine or not, the Marine Center is by your side, to provide you with a reliable diagnostic test and for any technical issue we encounter we are able proceed immediately to deal with it.
Phone : +30210 4004994